|
|
 |
| |
Available Pictures | Available Videos
|
This is the stage 1 kit that has it all. Powered by our 200 + PSI high pressure recirculation pump and activated by our 1-25 psi boost switch, this kit brings the stage 1 kit to the next level. You can adjust this kit to turn on between 1-25 psi. Our high pressure and high flow recirculation pump will have a nice steady flow without the pulsing you see in other pumps. The CMS1Deluxe kit has a 1 gallon tank and stainless steel solenoid as well as super atomizing injector as standard equipment. This is one great value. Other kits on the market make you pay more for a solenoid. Why not include something that will save your engine? Any kit should come with either a solenoid or a checkvalve. From drop down box tell us your Horsepower OR choose what size you want.
 | The pump is one of
the most important parts of your kit. All pumps are not the same even if they look the same. To start this pump is our 200-250 psi pump. In addition our pump has EPDM
seals. Ours are built with EPDM to assure higher heat tolerance and full methanol
compatibility. |
 | This kit has a solenoid standard instead of a checkvalve. Our solenoid is rated at 300 psi and is stainless steel. Try to find a higher quality solenoid. |
 | Our
fittings are all nickel plated quick connect and NO plastic. All quality metal. Dont buy a kit with cheap plastic
fittings. We are proud of these fittings and know the extra money we spend on touches like this is worth it, you will think
so too! Please note, the picture to the left shows the style of fittings you will get. This kit comes with one nozzle so
you dont get a tee, etc. |
 | Our nylon hose has burst pressure of over 1000 PSI but more important, it is semi clear so you can
look and see where the fluid is. If you are trouble shooting it makes all the difference to see if you have fluid in the
line or not. Each kit comes with 15 feet of this hose |
 | Our boost switch is adjustable from 1 to 25 psi. It will turn the system on when you reach the boost level
that the switch is set at. Any time past your set level it stays on. you can run upto 60 psi turbo pressure into this
boost switch. This switch is set at 10 psi and you can adjust it using the 5/64 hex key on the top. You will get 1 foot of silicon boost line AND a boost tee. |
|
|
|
|
|