|
|
 |
| |
Available Pictures | Available Videos
|
This is our high pressure standard water injection methanol injection trunkmount kit with high pressure recirculation pump . Choose the injector size from the drop down box or if you dont know, choose your power level and will get you the right one. Atomization is unbelieveable. There is no pulsing in this this pump as it has a bypass instead of a demand pump. In otherwords, you get consistent flow without the pulsing that some pumps on the market have.
our 1.5 gallon trunkmount tank is convenient the pump fits inside the tank making things very easy to install and compact. Our new solenoid with built in fittings as well as our super atomizing injector are standard with this kit.
included are all brackets for the tank. NO STRAPS needed. The aluminum die cut brackets screw into the side of the tank and then to the floor.,solenoid, super atomizing injector, new semi-clear high pressure nylon hose and all else that is needed.
The boost switch is adjustable between 1-25 PSI. Once you go beyond 25 PSI the system remains on.
 | The pump is one of
the most important parts of your kit. All pumps are not the same even if they look the same. To start this pump is our 200-250 psi pump. In addition our pump has EPDM
seals. Ours are built with EPDM to assure higher heat tolerance and full methanol
compatibility. |
 | Our new solenoid brings reliability to the next level. The fittings are built in allowing you to simply insert the tubing for easy connection. This eliminates leaky fittings and makes intall much easier. |
 | Our
fittings are all nickel plated quick connect and NO plastic. All quality metal. Dont buy a kit with cheap plastic
fittings. We are proud of these fittings and knextra money we spend on touches like this is worth it, you will think
so too! Please note, the picture to the left shows the style of fittings you will get. This kit comes with one nozzle so
you dont get a tee, etc. |
 | Our nylon hose has burst pressure of over 1000 PSI but more important, it is semi clear so you can
look and see where the fluid is. If you are trouble shooting it makes all the difference to see if you have fluid in the
line or not. Each kit comes with 15 feet of this hose |
 | Our boost switch is adjustable from 1 to 25 psi. It will turn the system on when you reach the boost level
that the switch is set at. Any time past your set level it stays on. you can run upto 60 psi turbo pressure into this
boost switch. This switch is set at 10 psi and you can adjust it using the 5/64 hex key on the top. You will get 1 foot of silicon boost line AND a boost tee. |
|
|
|
|
|