| Price Filter
for this category (click ALL PRODUCTS to filter everything) | | To
|
|  | | These connect to the elbow and are 1/8th pipe thread. These have a wonderful teflon seal and quick connect ring for full chemical compatibility. These work with 1/4 inch OD tubing. CLICK FOR MORE |
| |
|
 | | These injector holders are the alternative to the 90 degree. They are straight without any bends. They measure about 1/2 inch in length. Its important to note, these ONLY work with our superatomizing injector and if you get these you cannot order the filter. Our checkvalves have a filter built in so you will not need one. CLICK FOR MORE |
| |
|
 | | These are 90 degree nickel plated injector holders. 1/8th NPT F thread on each side of the elbow. Injector plugs into one side, fitting to other. CLICK FOR MORE |
| |
|
 | | This is our all metal nickel plated tee. It works with any 1/4 inch OD hose like the hose that our kits ship with. CLICK FOR MORE |
| |
|
 | | IN STOCK!!
These are our new Super Atomizing Injectors. Designed to out perform ordinary injectors due to an all new industry first design. The thread pitch is 1/8th NPT which is standard to all injectors, but that is about all this has in common. This is our CM5 injector which will flow 5-6 gallons per hour or 280 to 340 CC/M. This is recommended for engines making 250 to 350 HP. See our CM7 for higher HP engines. NOTE: These are sold seperate from our kits, bu CLICK FOR MORE |
| |
|
 | | IN STOCK
These are our new Super Atomizing Injector CM12. Designed to out perform ordinary injectors due to an all new industry first design. The thread pitch is 1/8th NPT which is standard to all injectors, but that is about all this has in common. This is our CM12 injector which will flow 14 GPH at full flow (Approx 1100-1200 CC/M NOTE: These are available for those that want to add to any kit on the market. Other parts such as injector elbows and hose fittings CLICK FOR MORE |
| |
|
 | | IN STOCK!These are our new Super Atomizing Injectors. Designed to out perform ordinary injectors due to an all new industry first design. The thread pitch is 1/8th NPT which is standard to all injectors, but that is about all this has in common. This is our CM7 injector which will flow up to about 10 gallons per hour. These are available for those that want to add to any kit on the market. Injector elbows and hose fittings are available in the injector link on this CLICK FOR MORE |
| |
|
 | | These are our new Super Atomizing Injectors size CM3. Designed to out perform ordinary injectors due to an all new industry first design. The thread pitch is 1/8th NPT which is standard to all injectors, but that is about all this has in common. This is our CM3 injector which will flow about 250 to 300 cc/m. These are available for those that want to add to any kit on the market. Other parts such as optional injector elbows and hose fittings are available in the injector link on this pa CLICK FOR MORE |
| |
|
 | | These are our new Super Atomizing Injectors size CM2. Designed to out perform ordinary injectors due to an all new industry first design. The thread pitch is 1/8th NPT which is standard to all injectors, but that is about all this has in common. This is our CM3 injector which will flow about 180 to 250 cc/m. CLICK FOR MORE |
| |
|
 | | IN STOCK!!
These are our new Super Atomizing Injector CM10. Designed to out perform ordinary injectors due to an all new industry first design. The thread pitch is 1/8th NPT which is standard to all injectors, but that is about all this has in common. This is our CM10 injector which will flow 12.8 GPH at full flow (Approx 800 CC/MNOTE: These are available for those that want to add to any kit on the market. Other parts such as injector elbows and hose fittings ar CLICK FOR MORE |
| |
|
 | | This is our CM14. Its not for the average vehicle thats for sure. with our pump this puts out about 18 gallons per hour give or take a little. If you are in the need of alot of flow this one is for you. This is just the injector. You can find the injector holder and hose fittings in our parts section if you need those. The thread is 1/8th NPT Male. CLICK FOR MORE |
| |
|
 | This is a 4 port direct port solenoid. On one end of the block is an in port, on the long end is 3 out ports and there is a 90 degree fitting on the far end that has the 4th out port. If you have an 8 cylinder you can order 2 of these. If you have a 6, you can order 2 of these and block off 2 ports.
Features
built in quick connect fittings
built in solenoid
1 port IN
4 ports out. CLICK FOR MORE |
| |
|
 | | We get alot of requests for direct port systems and we decided to design the best direct port setup you have ever seen. The direct port distribution block has 4 ports with built in fittings and a solenoid that is built into the direct port. In addition, this kit will come with 4 of our super atomizing injectors (your choice) and our new special 1 piece injector holders. with this setup, we have eliminated many fittings and built them into the solenoid/block and injector holders. This will gi CLICK FOR MORE |
| |
|
| To send us an email fill out the fields below and we
will respond asap |
|
|
|