| Author |
 Topic  |
|
|
wasp
Australia
1 Posts |
 Posted - 11/03/2009 : 15:45:12
|
Hi How do I calculate the nozzle size,I have a MX5 NA 1800 Supercharged with IC and 12lb boost at 7000rpm
Cheers
Steven |
|
|
cmtech
USA
385 Posts |
Posted - 11/03/2009 : 20:44:39
|
we look at size of engine, type of kit, pressure of pump, horsepower and then estimate based on our experience.
CM
www.coolingmist.com
 |
 |
|
|
cmtech
USA
385 Posts |
Posted - 11/03/2009 : 22:43:19
|
I assume you are under 200 HP? I try to stay close to 1 CC per HP. So maybe around 180 to 200 CC/M.
CM
www.coolingmist.com
|
|
|
|
clarkjr
USA
2 Posts |
Posted - 11/05/2009 : 01:47:09
|
| Hi, I have a toyota supra. It is 514 rwhp now, but i am planning on getting the 250 PSI standard trunk mount kit and stainless hose. I am having it tuned to try and get around 700rwhp. I am not sure what boost this will be. I was wondering what size injector i need to order, or will the one that comes with the kit be ok. |
|
|
|
cmtech
USA
385 Posts |
Posted - 11/05/2009 : 16:12:03
|
quote:
[i]Originally posted by clarkjr[/i]
[br]Hi, I have a toyota supra. It is 514 rwhp now, but i am planning on getting the 250 PSI standard trunk mount kit and stainless hose. I am having it tuned to try and get around 700rwhp. I am not sure what boost this will be. I was wondering what size injector i need to order, or will the one that comes with the kit be ok.
you will need our large injector (760 CC) with no doubt.
More questions let us know.
CM
www.coolingmist.com
|
|
|
|
clarkjr
USA
2 Posts |
Posted - 11/06/2009 : 20:11:18
|
I am trying to order the 250 PSI standard trunk mount kit. You said I need the 760CC injector. I am now wondering does the kit come with a checkvalve, how much stainless hose do I need to order, what stainless fittings I need to order to connect to the checkvalve and injector.
Thanks
Jesse |
|
|
|
cmtech
USA
385 Posts |
|
|
enrick
1 Posts |
Posted - 12/17/2009 : 20:23:51
|
Hi there, I have a Fiat Coupe 2.0l Turbo standard [220HP] from the factory. What nozzle size would I need and what kit would you recommend ? Appreciate the advise. Cheers! |
|
|
|
cmtech
USA
385 Posts |
Posted - 12/18/2009 : 00:26:18
|
quote:
[i]Originally posted by enrick[/i]
[br]Hi there, I have a Fiat Coupe 2.0l Turbo standard [220HP] from the factory. What nozzle size would I need and what kit would you recommend ? Appreciate the advise. Cheers!
I would go with 180 CC injector. I would look at the VC2 stage 1, vc2 FS or the CMGS FS. These are progressive and offer various features that "on / off" kits dont have. let me know how else I can help.
David
www.coolingmist.com
|
|
|
|
Radimir
Kazakhstan
1 Posts |
Posted - 04/27/2010 : 02:33:02
|
I buy VC2_FS+1 Gallon (to 300) complete (order Yershov04092010090042CIE1), in complete I find 3 injectors with labels "M3", "M5", "M14" w/o partnumbers according Coolingmist catalogue - that flow rates has this injectors?
And that injectors will be better for 2.4l Mitsubishi 4G64 normally aspirated gasoline engine (in case of use Coolingmist system primarily for reduce detonation due to bad gasoline quality)???
Also then I can to see examples of Coolingmist system installation??? |
|
|
|
cmtech
USA
385 Posts |
Posted - 04/27/2010 : 20:10:59
|
M3=250 CC/M, M5=380 CC/M and the other is 1000 cc/m (ml per minute).
I would use M3.
CM
www.coolingmist.com
|
|
|
|
ac80
Mexico
1 Posts |
Posted - 07/24/2010 : 01:03:18
|
Hi my car is a 2.5l with big turbo and 20/22 psi and about 250hp. I've only got nozzle m5 and m8, which one is the best for this car and configuration?
Thank you very much for your help.
|
|
|
|
cmtech
USA
385 Posts |
|
| |
Topic |
|
Nozzle size
