|
Water Injection, Methanol Injection, Alcohol Injection Systems: Coolingmist
|
Proven design, proven Results. This is our controller only. For those looking for a complete kit see our Stage II Vari-Cool Kit. The most advanced digital methanol injection controller on the market. Our free software makes this controller come alive OR you can use it in its default state which will surely add serious performance to your kit.
For those of you that dont want to hack your factory wiring, the Vari-Cool Controller is for you. a 1-30 psi minimum and 1-30 psi maximum setting means you can vary the flow between those two points. You can run up to 60 psi boost pressure into the unit. Simply put your vacuum line over the boost port and its ready to go. For those that prefer to use your factory MAP sensors signal you are in luck because your controller can work like that as well.
The 10 position tuning button ensures you have proper flow in situations where you need to lower or raise the flow. This feature changes the max dutycycle of the pump. This is great for fine tuning. As you turn the knob higher you get more dutycycle. In otherwords, it will lower the maximum flow of the injector when you lower the knob. If you have tuning needs you can hook up our free software to change the start pressure, max pressure or curve of the system.
with our various attachments you can run the controller off of EGT or IAT in addition to boost.
Probably one of the coolest features is that our controller can allow you to run both the 0-5V input and the Boost at the same time. Using our software you can configure it for example:
Have the 0-5V as the Primary Input and only activate when boost is over a certain Amount (user adjustable)
Or have the boost as the primary input but only activate when at or above a certain voltage.
Remember our controller has a CPU and is 100% digital. The accuracy rate and flexiblity of this unit is astounding.
Coolingmist controller is the only unit on the market that allows for both a 0-5V input and a boost port. This means you dont have to choose, you can do either. We took it a step further and let you use both at the same time. It will require you to use the software if you want to run the 0-5V and the Boost Port at the same time. This controller can handle upto a max of 55 to 60 psi. The MAX rating of this controller means peak, not sustained flow. If you are running more than 50 psi we recommend our 4-120 psi controller.
you do not need to hook this to a computer, it is designed to plug and play |
|
|
|
|
| | | |