|
Water Injection, Methanol Injection, Alcohol Injection Systems: Coolingmist
|
|
|
|
| With hose fitting? |
|
|
|
|
|
|
|
|
|
|
|
Coolingmist Exclusive!!
Our nozzles are 100% methanol/alcohol/water compatiable. The 90 degree elbow is included. if you need a straight fitting please email or call us we can include at no additional charge.
To get the flow rate of this nozzle in CC per Minute at various pressures find the part number on this chart below. This part number is 13N180
The flow rate in CC/M at various pressures is below in this chart. Keep in mind this is raw flow rate, does not take into effect your boost pressure or checkvalve cracking pressure.
The chart below shows all of our nozzles..
This nozzle is rated at 2.8 Gallons per hour @ 150 psi (M2).
Our new nozzles can be installed from the outside of our pipe or manifold. Just get a 1/8th tap and you dont have to take your pipe off or drill it. Makes things simple!!
How do these work? Tap the pipe with a 1/8th TAP. Screw the injector into the tapped pipe (holding the injector holder). With your hand it will tighten completely. Easy as can be!! A Buna O-Ring is now included with the injection nozzle for a perfect seal!
Choose from the drop down box if you need our quick disconnect fitting for 1/4 Hose. If so you will get the injector with the holder as below.
 |
|
|
|
|
| | | |