|
Water Injection, Methanol Injection, Alcohol Injection Systems: Coolingmist
|
|
|
|
| Tank Option |
|
| Staged Options? |
|
| Horse Power Range |
|
|
|
|
|
|
|
250 PSI PUMP!!!! order this ONLINE and if you put FREE TRUNKMOUNT TANK in the special instructions, we will give you the $100 trunkmount tank FREE! If you prefer the 1 gallon tank choose "1 gallon tank" from the drop down box instead. This offer for the free tank is only for a short period. You must order on line to get the free tank and only during the limited time offer. SEE PICTURES BELOW:
powered by the newest technology...We call it smart injection for a reason. We will provide you with a document to show you the different features. You set this product up the way you want. You can download a PDF to read a little about this. We have some nice examples and detailed software setup in this 29 page PDF located on the CD that comes with it. We have an online and PDF tech guide here for the controller.
THIS SYSTEM IS NOT PROGRAMMED. READ OUR DOCUMENTATION TO GET IDEAS ON HOW TO CONFIGURE THE SMART CONTROLLER WITH THE INCLUDED SOFTWARE. ITS UP TO YOU HOW YOU SET THE UNIT UP. THIS IS REALLY A KILLER DEAL ON AN AWESOME SYSTEM. INCLUDES
Smart Controller
High Pressure 200-250 psi bypass pump
Relay
Relay Harness
Fuse
Fuse HOlder
15 Feet of Fluid hose
Checkvalve with Integrated Filter and Fittings
2 Injectors sized to your horse power range
Trunkmount tank or 1 gallon tank FREE (LIMITED TIME)
All mounting hardware for tank. Straps, brackets, screws bolts, etc
Roll of primary wire
Serial Cable (while supplies last only)
OPTIONS
Second stage includes solenoid, tee, injector. (Optional)
DOCUMENTATION
This system will be setup by you using our software. If you need help feel free to contact us. Documentation is here
PDF DOWNLOAD
This device functions on many different levels. If you are looking for the most basic system or the most elaborate.
SMART CONTROLLER FEATURES
4 0-5V inputs (map, maf, tps, any 0-5 sensor)
2 high speed counter inputs (square wave frequency, RPM)
1 mv input
5 programmable outputs (can be used to activate or deactivate devices..up to 5 devices). Activation of any of these outputs can be conditional upto 3 of the inputs.
3 programmable LEDs. You can make the LEDS blink slow, fast, solid or turn off based on any of the inputs.
Programmable 0-5V output. You can program a 0-5V output based on your inputs.
Any of the inputs can be user defined. You can set the range of the RPM or voltage or Frequency within the software and have the controller react between those two variables.
Please read the documentation in the PDF link provided earlier. Call or email us for any questions.
DIAGRAM EXAMPLE
This system can be as simple as turning on a pump to inject when your MAP or MAF is above a certain amount or you can integrate failsafes into it, dual stages, etc. Here is an an example of setting this up as a failsafe system using a boost switch to turn the system on. You can use your RPM, MAP, Throttle position, MAF or any other signal. This is simply meant to give you an idea of things you can do. If you want to follow this example you need a boost switch and our flow sensor (not included).
 |
|
|
|
|
| | | |